Detecting Early Damage Car Battery
Batteries are often worn not necessarily broken, because it could be the battery that troubled labor support. Use hydrometer as your detection devices or detection equipment as simple as a multitester. Follow the steps below.
Often we panicked and immediately replace the batteries that we consider problematic. Things like this can be avoided if you can detect early damage to battery.can find out what's happening in our battery, follow these steps.
- Use a hydrometer to detect levels of acid and water density batteries. At the hydrometer tube there are three colors, each of which has its own meaning. The green color indicates levels of acid and battery acid specific gravity is too light, the result is sent to the battery power can not be stored for long.
- If there are no detection tools, do a simple detection method. Turn on the machine and remove the positive battery terminal. If the machine still alive, meaning the alternator and regulator work normally.
- Another alternative detection devices using multitester (voltmeter). Use multitester on the DC current in the 50 volt. Turn on the machine and connect the red needle on the head multitester battery positive and the black needle on the negative battery head. Needles should figures show 13.8 to 14.8 volts. If less or more significant problem is the alternator and regulator.
- Check the color of the water batteries white color indicates good water batteries means the charging system is working normally. The red color means the alternator and regulator work too much supply stun (overcharge) on battery.
- Watch out! Do not even disconnect the negative battery terminal (mass) because one of the wires on the regulator masses will not succumb to excessive power.
Thus we provide tips about this battery Water,hopefully can add insight you all.